Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—38—
STEP 5.
Establish Ethernet Connection to Customer’s BHR.
Action
Install a Cat5/Ethernet cable between the HPAV to Ethernet Bridge and a port on the
customer’s BHR.
STEP 6.
Observe LEDs.
Action
All three green LEDs on the HPAV to Ethernet Bridge should be illuminated indicating that
the HPAV to Ethernet Bridge has an Ethernet connection to the customer’s BHR and
there is a HPAV network connection over the in-home electrical wiring system between
the HPAV to Ethernet Bridge and the DLC AC-to-AC Adapter with Integrated HPAV. The
Power LED should be solid green, the PLC Link should be flashing green and the
Ethernet LED should be flashing green.
STEP 7.
Return to Location of DLC Cabinet.
Action
Return to the location of the installation of the DLC Cabinet and unplug the DLC AC-to-AC
Adapter with Integrated HPAV unit from the AC power outlet.
STEP 8.
Install DLC Cabinet and DLC AC-to-AC Adapter with Integrated HPAV.
Action
Proceed with the installation of the cabinet and the DLC AC-to-AC Adapter with Integrated
HPAV unit.
STEP 9.
Terminate data and power on the DLC AC-to-AC Adapter with Integrated HPAV
and the DLC
