Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—114—
6.2.10.6 Discovering and Registering the 433MHz Repeater
Follow these steps to discover and register the 433MHz repeater:
Step
Action
1.
Place the DLC into Discovery Mode in DLD.
2.
Make the 433MHZ Repeater discoverable by inserting the batteries and
plugging into an AC power outlet.
3.
Confirm that the 433MHz Repeater has been discovered in DLD.
4.
Label the 433MHz Repeater in DLD.
6.2.10.7 Installing the 433MHz Repeater
The installation kit includes One (1) retaining screw. To install the 433MHz repeater,
plug it into a 120V AC outlet. Use the retaining screw to secure the repeater into the AC
wall socket.
Back-up power for the SW-ATT-RPT4 is provided by two (2) lithium CR123A non-
rechargeable batteries.
6.2.10.8 Specifications—433MHz Repeater
General Specifications—RPT4
Compatible Panels
Digital Life Controller
Backup Power
2x CR123A lithium batteries
Battery Type
CR123A lithium
Required Batteries
2
Frequency
433.92MHz
Operating Environment
Temperature:
32°F (0°C) to 120°F (49°C
Relative Humidity: 5 to 95% non-condensing
Physical Dimensions
Overall Size: 5.0 inch x 2.6 inches x 1.3 inches
Material: High impact ABS Plastic
Color: AT&T White
Power
Nominal Input
Voltage: 120V AC
, 50/60 HZ
Nominal Current: Less than 100 milliamperes
