Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—147—
8 System Messages on Keypad LCD
Table 2 contains system generated messages that appear in the Keypad LCD concerning
the status of the system or specific devices.
(I will update this table based on what John proposed…we need to check and see what has
been implemented)
Table 2: System Messages on Keypad LCD
System Messages
Meaning
“System Under Test”
System is in Test Mode
“ERR: Alarm was not sent to
AT&T”
Displays if an Alarm was not delivered to Digital Life
Central Monitoring Center
“System Battery Failure”
DLC Cabinet 24 hour backup battery is failing or
has failed and needs to be replaced
“Maintenance Mode”
Software is being upgraded on the DLC Cabinet
“Fire Alarm Sent”
A fire alarm has been sent to the Digital Life Central
Monitoring Center because a smoke detector has
been triggered
“CO Alarm Sent”
A CO alarm has been sent to the Digital Life Central
Monitoring Center because a CO detector has been
triggered
“Intrusion Alarm Sent”
An intrusion alarm has been sent to the Digital Life
Central Monitoring Center because an intrusion
sensor has been triggered
“<Device Name> - Opened”
A door sensor, window sensor or glass break
detector has been triggered
“<Device Name> - Tamper””
A tamper switch on a device has been triggered
