AT&T Digital Life Installation And Operation Manual Download

Page: 18 / 169

Installation and Operations Manual

AT&T Proprietary (Internal Use Only)

—xvi—

Protect from Exposure to Moisture and Foreign Objects

WARNING: Avoid electric shock and fire hazard! Do not expose this product to

dripping or splashing liquids, rain, or moisture. Objects filled with liquids, such

as vases, should not be placed on this apparatus.

WARNING: Avoid electric shock and fire hazard! Unplug this product before

cleaning. Do not use a liquid cleaner or an aerosol cleaner. Do not use a

magnetic/static cleaning device (dust remover) to clean this product.

WARNING: Avoid electric shock and fire hazard! Never push objects through the

openings in this product. Foreign objects can cause electrical shorts that can

result in electric shock or fire.

Service Warnings

WARNING: Avoid electric shock! Do not open the cover of this product. Opening

or removing the cover may expose you to dangerous voltages. If you open the

cover, your warranty will be void. This product contains no user-serviceable

parts.

Check Product Safety

Upon completion of any service or repairs to this product, the service technician must

perform safety checks to determine that this product is in proper operating condition.

Protect the Product When Moving It

Always disconnect the power source when moving the apparatus or connecting or

disconnecting cables.

20090915_Modem No Battery_Safety

Summary of Contents for Digital Life










































































































































































Search results

Summary of Contents for Digital Life

Reviews:

Related manuals for Digital Life

Brands by name

Popular brands

AT&T Digital Life, Installation And Operation Manual

Search results

Summary of Contents for Digital Life

Reviews:

Related manuals for Digital Life

Brands by name

Popular brands