Vehicle Body Argo Service Manual
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
VB-8
Removing the Rear Seat (All 8x8 Models)
Rear seats on all 8x8 models are quick release and require no tools to remove.
1.
Grab the rear seat and raise it high enough for the plastic bumper fastened to the
underside of the seat cushion, to clear the hole in the upper body below.
Photo VB-10
2.
Push the seat towards the inside of the cargo department and lift up and out. Photo
VB-11
VB-10
VB-11
Installing the Rear Seats (8x8 models)
1.
Place the rear seat into position aligning the larger routed area with the large lower
seat washer. Photo VB-12
2.
Pull the seat towards yourself until the 2 plastic bumpers clip into the holes that are
drilled in the upper body. Photo VB-13
VB-12
VB-13
Removing the Rear Seats (6x6 models)
The rear seats of 6x6 models are fastened by a single bolt, fender washer and large plastic
washer. These are threaded into an insert within the seat cushion.
