Argo Service Manual Wheels, Axles & Chains
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
WA-31
6.
Perform the servicing procedure, Removing the Brake Disc in section BR. (Op-
tional, if you find it easier to access the idler shaft).
7.
Perform the servicing procedure, Drive Chain Removal. Remove the front drive
chain connecting the front wheel to the idler axle, as well as the drive chain connect-
ing the center wheel to the idler axle. Photo WA-63
5.
Perform the servicing procedure, Idler Chain Removal.
WA-63
8.
Locate the 2 set screws on the inner and outer bearings and remove.
Photo WA-64 & 65
WA-64
9.
Using a pry bar at the outer bearing,
pry the idler axle assembly towards
the inner bearing to loosen up the
shaft. Photo WA-66
10. Remove all the hardware from the
inner and outer bearing flanges.
WA-00
On vehicles manufactured prior to
S10178 & SN10191:
i.
Slide an open end wrench between the
lower body and frame, at the outer idler
axle bearing flange assembly. Hold the
head of the bolt while removing the 2
nuts and lockwashers.
ii.
Remove the hardware on the flange of
the inner bearing.
WA-65
WA-66
