BR-13A
Figure 3 - Remove Brake Lever.
4. Remove the two (2) mounting bolts holding the caliper
assembly together. Figure 4.
Figure 4 - Remove Mounting Bolts.
5. Split and remove the caliper assembly. Figure 5 Take note
of all spacers, shims and washers within the assembly.
Refer to your illustrated parts list in your Argo Parts manual
for all locations of these components.
6. Locate the 850-84 Dead Side Brake Housing and remove
the screw securing the brake puck. Remove the brake puck
and discard. Figure 6.
7. Locate the Live Side Brake Housing and turn upside down
to remove 2nd brake pad from the housing cavity. Please
note that there is also a washer placed beneath the brake
pad.
Instructions:
Both left and righthand side emergency/parking brake
caliper pads should be changed in pairs. Do not attempt to
just replace one side.
1. Locate the emergency/parking brake caliper attached to
the main brake caliper. Figure 1. Left hand side example.
Figure 1 - Locate Caliper.
2. Locate the castle nut at the brake cam lever and remove the
cotter pin and castle nut. Figure 2.
Figure 2 - Remove Cotter Pin.
3. Using both hands, remove the brake lever assembly from
the Brake Housing - Live Side and disconnect spring. Fig-
ure 3.
Ontario Drive & Gear
Phone (519) 662-2840 Fax (519) 662-2421
