Wheels, Axles & Chains Argo Service Manual
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
6.
Install a cork gasket at the front aluminum axle extension followed by a steel inner
flange and second cork gasket. Photo WA-12
WA-12
WA-13
7.
Apply some anti-seize compound to the spline area of the axle shaft. Photo WA-13
8.
Slip the axle assembly into the front bearing extension. Photo WA-14
On the inside
of the vehicle, prepare to install the front sprocket as the axle is pushed through to
the inner bearing.
IMPORTANT
The front axle sprocket is a "floater" and requires no set screws. Orient the
sprocket with the larger shoulder facing towards the inside of the vehicle. Photo WA-
15
WA-15
WA-14
9.
Align the mounting holes of the greasable flange with the studs of the aluminum
bearing extension and place into position up tight against the cork gasket. Photo
WA-16
10. Install flat washers to the studs. Photo WA-17
WA-53A
