Wheels, Axles & Chains Argo Service Manual
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
WA-22
WA-47
WA-48
4.
Place the vehicle in neutral gear and roll the vehicle until the connecting link on the
idler chain is half way between the brake disc sprocket and the idler assembly
sprocket. Photo WA-48
5.
Using a small slot screwdriver, pry off the clip securing the connecting link to the
chain.
6.
Remove the connecting link taking care to collect the end cap and 2 internal spacers
that are installed between the double 40 or 50 chain.
7.
Slide the idler chain free of the brake disc and idler shaft assembly. It may be neces-
sary to roll the vehicle forward or backward to achieve this.
If the vehicle can be raised off the ground, the wheels can be easily rotated to remove and
reinstall any of the chains in the drive train system.
Idler Chain Cleaning
Maintenance Schedule-Clean every 100 hours of vehicle operation.
1.
Perform the servicing procedure, Idler Chain Removal.
2.
Clean the chain with a strong solvent such as varsol. This will remove all chain
lube, dirt, and accumulated grease.
Never use gasoline as a cleaning solvent. Gas is extremely flammable and can
explode if ignited, causing serious personal injury or death.
The left hand side idler chain may prove easier to remove if the driven clutch is removed
first. Perform the servicing procedure, Driven Clutch Removal, in section CS of this
service guide.
