Brake System
Argo Service Manual
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
BR-35
Always refer to the PARTS MANUAL that corresponds to the specific model and
serial number indicated on the serial tag plate of your vehicle. This is essential to
locating and ordering the correct components that were used during that particular
manufacturing period.
It is also very helpful using the illustrations to clearly see and
define the component being referred to.
If components are no longer listed in your
Spare Parts Price List (Distributors and Dealers Only) generally the superceded
section will indicate which part(s) will update or replace it. All parts manuals are
available in PDF format on CD.
IMPORTANT
Brake Disc Inspection
Badly worn brake pads, or abnormal use of the vehicle, can cause serious damage to
the brake discs. Inspect the brake discs for the condition listed in the chart below,
and perform the recommended servicing procedures.
Maintenance Schedule - Inspect every 50 hrs. of vehicle operation.
IMPORTANT
Brake Disc Condition Corrective Action Servicing Procedure
Rust or Pitting Replace Immediately
1. Brake Disc Removal
Bends or Cracks
2. Brake Disc Installation
Scratches or Scoring
Broken or worn
Sprocket teeth
Glazing
Clean
1. Brake Disc Removal
Oil or Grease Con-
2. Brake Disc Installation
tamination
3.
Release the steering lever, allowing the holding brake lever to lock the left brake on.
4.
If the steering lever grip is approximately 18 cm (7") from the dash, the holding
brake system is correctly adjusted.
5.
If the distance from the dash is greater, refer to Steering Lever Adjustment to
properly set the left lever.
