Brake/Steering System Argo Service Manual
BR-6A
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
ST-21
ST-22
ST-23
13. Tighten down the Nylon Locknut snug.
Back off the Locknut just enough to al-
low the Flat Washer below to be turned
by hand. Do not overtighten. Ensure
the shaft turns freely with minimal end
play. Photo ST-23
12. Install a Flat Washer and a new 117-29
Nylon Locknut to the threaded end of
the steering shaft. Photo ST-22
10. Place the key to the end of the Steering Shaft. Photo ST-19 Vehicles manufactured
from serial numbers N14990, V23535, R23560, A15022 utilize 2 keyways and 2
keys.
11. Align the keyway(s) of the Lower Handle Bar Clamp with that of the previously
installed key(s) and assemble to the Steering Shaft. Photo ST-20 & 21
ST-20
ST-19
