Argo Service Manual Vehicle Body
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
VB-7
Removing the Floor Pans
Draining water from the lower body, or any servicing of the Argo drive train, will require
the removal of the floor pan assemblies.
Removing the Front Floor Pan
2.
Locate and remove the 2 hitch pin clips
securing the front floor pan and remove.
3.
Pull up at the front of the floor pan and
remove from the vehicle
Photo VB-8
Installing the Front Floor Pan
1.
Place the floor pan in rear first and
drop in at the front. Align the holes
in the floor pan with the clevis pins
and secure the pan with the hitch pin
clips.
When installing the front floor pan into vehicles manufactured prior to CB16049,
RB16104, SN10191 or S10178, be sure to raise the floorpan high enough at the rear
of the pan, to avoid it catching and flipping the mid front chain tensioner block
upside down.
VB-8
Removing the Rear Floor Pan
1.
Locate and remove the 2 (6 wheel) or 4
(8 wheel) hitch pin clips securing the
rear floor pan and pull the floor pan out
of the vehicle. Photo VB-9
VB-9
Installing the Rear Floor Pan
1.
Insert the rear floor pan into the vehi-
cle. Align the holes in the floor pan
with the clevis pins and secure the
pan with the hitch pin clips.
IMPOR
IMPOR
IMPOR
IMPOR
IMPORT
T
T
T
TANT
ANT
ANT
ANT
ANT
1.
Perform the servicing procedure, Removing the Firewall, in this section of the serv-
ice guide (Conquest, Response, Vanguard2 and Bigfoot only).
