Argo Service Manual Wheels, Axles & Chains
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
WA-16
WA-17
11. Secure with nylon locknuts and torque to specifications. Photo WA-18
WA-18
WA-19
12. Apply blue LOCTITE to the threads of
the fastener (Photo WA-19), used to se-
cure the end of the axle to the inner bear-
ing and install.
Photo
WA-20
Torque
to specifications. Refer to your illus-
trated parts manual for the breakdown
of the hardware used.
WA-20
13. Apply blue LOCTITE to (2) bearing set screws and install into the bearing collar.
Torque to specifications.
The example front axle replaced in this
procedure was on the left side of the
vehicle. The hardware used to secure the inner bearing flange assembly on this side,
utilizes a longer fastener installed to the top left location. It is also installed from the
opposite side as compared to the others. This is used for the installation of the
optional accessory bilge pump. Photo WA-22
WA-54A
