Arcteq Generator Commander, Instruction Manual

Page: 483 / 561

Name Range Step Default Description
Residual
current deadband
0.01…50.00A 0.01A 0.2A
Determines the data reporting deadband settings for this
measurement.
Voltage deadband 0.01…5000.00V 0.01V 200V
Determines the data reporting deadband settings for this
measurement.
Residual
voltage deadband
0.01…5000.00V 0.01V 200V
Determines the data reporting deadband settings for this
measurement.
Angle
measurement deadband 0.1…5.0deg
0.1deg 1deg
Determines the data reporting deadband settings for this
measurement.
Integration time 0…10 000ms 1ms - Displays the integration time of the protocol.
7.1.9 IEC 101/104
The standards IEC 60870-5-101 and IEC 60870-5-104 are closely related. Both are derived from the
IEC 60870-5 standard. On the physical layer the IEC 101 protocol uses serial communication whereas
the IEC 104 protocol uses Ethernet communication. The IEC 101/104 implementation works as a slave
in the unbalanced mode.
For detailed information please refer to the IEC 101/104 interoperability document ( www.arcteq.fi/
downloads/
→
AQ-200 series
→
Resources
→
"AQ-200 IEC101 & IEC104 interoperability").
IEC 101 settings
Table. 7.1.9 - 402. IEC 101 settings.
Name Range Step Default Description
Common address
of ASDU
0…65
534
1 1
Defines the common address of the application service data unit (ASDU)
for the IEC 101 communication protocol.
Common address
of ASDU size
1…2 1 2 Defines the size of the common address of ASDU.
Link layer address
0…65
534
1 1 Defines the address for the link layer.
Link layer address
size
1…2 1 2 Defines the address size of the link layer.
Information object
address size
2…3 1 3 Defines the address size of the information object.
Cause of
transmission size
1…2 1 2
Defines the cause of transmission size
IEC 104 settings
Table. 7.1.9 - 403. IEC 104 settings.
Name
Range Step Default
Description
IEC 104 enable
0:
Disabled
1:
Enabled
-
0:
Disabled Enables and disables the IEC 104 communication protocol.
IP port
0…65
535
1 2404 Defines the IP port used by the protocol.
Common
address of ASDU
0…65
534
1 1
Defines the common address of the application service data unit (ASDU) for
the IEC 104 communication protocol.
Genera Generattor Commander or Commander
Instruction manual
Version: 2.07
© Arcteq Relays Ltd
IM00001 481