AQUAERO
- 42 -
Aqua Computer GmbH & Co. KG
© 2004-2009
Gelliehäuser Str. 1, 37130 Gleichen, Germany
17. Menu „Profile Settings“
17. Menu „Profile Settings“
17. Menu „Profile Settings“
17. Menu „Profile Settings“
The aquaero can save 2 different profiles including its settings internally.
With a profile, all fan and sensor settings are saved but not names and
hardware specific data like sensor offsets and calibration values. This
data is saved independently from the profile.
The usage of these profiles allows you for instance to set up the system
for maximum cooling performance and for a low-noise operation and
to switch between these profiles quickly..
17.1. Load Profile 1
17.1. Load Profile 1
17.1. Load Profile 1
17.1. Load Profile 1
Loads the saved profile-settings from profile 1.
17.2. Load Profile 2
17.2. Load Profile 2
17.2. Load Profile 2
17.2. Load Profile 2
Loads the saved profile-settings from profile 2.
17.3. Copy Profile
17.3. Copy Profile
17.3. Copy Profile
17.3. Copy Profile
Copies the data from the currently active profile to the inactive profile. If
for instance profile 1 is loaded, the data from profile 1 is copied to pro-
file 2. All previous data from profile 2 will be overwritten.
17.4. Default Setting
17.4. Default Setting
17.4. Default Setting
17.4. Default Setting
Overwrites the data of the current profile with the default values of the
aquaero.
NOTE: If the relay is used to switch the ATX-break-line, the computer
will be shut down immediately because also the data of the relay is re-
turned to the default setting. In order to avoid data loss, you should
therefore disconnect all devices except the aquaero from the PSU prior
to loading the default settings!
