AQUAERO
- 32 -
Aqua Computer GmbH & Co. KG
© 2004-2009
Gelliehäuser Str. 1, 37130 Gleichen, Germany
12. Menu "Re
12. Menu "Re
12. Menu "Re
12. Menu "Relay Parameters"
lay Parameters"
lay Parameters"
lay Parameters"
This menu is used for the configuration of the emergency shutdown
function. This function requires further components (connecting cable
for the relay output, where applicable a standby power supply) as well
as the correct integration of the relay output into the ATX-control line of
the PSU or into the connector of the power-button on the mainboard.
Optimally configured, this function can effectively prevent hardware
damages when one or more components fail even if the PC already
crashed a long time ago and software solutions failed.
12.1. Alarm On/Off
12.1. Alarm On/Off
12.1. Alarm On/Off
12.1. Alarm On/Off
Here you can activate and deactivate respectively the entire emergency
shutdown function. If you choose "Emergency shutdown off", all further
settings remain deactivated and the PC will not be shut down under any
circumstances.
12.2. Alarm
12.2. Alarm
12.2. Alarm
12.2. Alarm----Off
Off
Off
Off----Timeout
Timeout
Timeout
Timeout
Enter the time span for the advance warning between crossing an alarm
threshold and turning off of the PC. Adjustable in 5-second-steps from 0
(immediate shutdown) to 180 seconds.
12.3. Alarm
12.3. Alarm
12.3. Alarm
12.3. Alarm----Ev
Ev
Ev
Events
ents
ents
ents
Here, you can the en- or disable individual events that lead to the
emergency shutdown. The events are:
Alarm fan 1
Alarm fan 2
Alarm fan 3
Alarm fan 4
Temp.-Alarm
Flow Alarm 1
Flow Alarm 2
Alarm Level
Water Wave
Pump 1 Error
Pump 2 Error
