AQUAERO
- 12 -
Aqua Computer GmbH & Co. KG
© 2004-2009
Gelliehäuser Str. 1, 37130 Gleichen, Germany
4.14. Power
4.14. Power
4.14. Power
4.14. Power----LED
LED
LED
LED
This green LED shows the correct power supply to the microprocessor of
the aquaero. Should the LED not light up although the PSU is correctly
connected, please check the position of the jumper JP1. See 4.11. JP1
Power Supply Jumper.
4.15. Aquaero Power Connect (optional accessory)
4.15. Aquaero Power Connect (optional accessory)
4.15. Aquaero Power Connect (optional accessory)
4.15. Aquaero Power Connect (optional accessory)
The following picture shows the possible connections of the Aquaero
Power Connect cable. The standby power supply is to be connected to
the appropriate connector of the aquaero. The green ATX PS_ON# line
can be cut through and connected with a plug for the relay outlet. If you
want to use the relay outlet for connection to the power switch line of
the mainboard, the ATX PS_ON# line must remain intact!
