MANUAL
© 2004-2009
Aqua Computer GmbH & Co. KG
- 11 -
Gelliehäuser Str. 1, 37130 Gleichen, Germany
4.10. Standby
4.10. Standby
4.10. Standby
4.10. Standby----Power
Power
Power
Power
Connection possibility for a additional power supply via the 5 V standby
strand of the PSU. In this case the aquaero stays active even when the
computer has been shut down (Soft-Off). See also JP1. Only use cables
specified by aqua-computer (not included in delivery)! See also 4.9.
Pin assignment:
Pin 1: GND
Pin 2: +5V Standby
4.11. JP1 Power Supply Jumper
4.11. JP1 Power Supply Jumper
4.11. JP1 Power Supply Jumper
4.11. JP1 Power Supply Jumper
With this Jumper you can decide whether you would like the power sup-
ply coming from the power supply connector (see 4.2. Power) or the
standby-power supply (see 4.10. Standby-Power). By default the Jumper
is set for the power supply connector.
NOTICE: The supply of the fans and the display illumination are always
supplied via the power supply connector!
Jumper setting:
Pin 1-2: Standard-power-supply
Pin 2-3: Standby-power-supply
4.12. aquabus (I
4.12. aquabus (I
4.12. aquabus (I
4.12. aquabus (I
2
2
2
2
C
C
C
C----bus)
bus)
bus)
bus)
3-pin add-on connector for optional add-on components by aqua-
computer such as aquastream XT, tubemeter or multisw
aquastream XT, tubemeter or multisw
aquastream XT, tubemeter or multisw
aquastream XT, tubemeter or multiswitch
itch
itch
itch. Only use
cables specified by aqua-computer (not included in delivery)! If multiple
components are to be connected, an „aquabus Y adaptor cable“ (art.
no. 53063) is required for each addition device.
Pin assignment:
Pin 1: GND
Pin 2: SDA
Pin 3: SCL
4.13. Expansion
4.13. Expansion
4.13. Expansion
4.13. Expansion
20-pin expansion port for optional accessories from aqua-computer.
Only use cables and components specified by aqua-computer (not in-
cluded in delivery)!
