MANUAL
© 2004-2009
Aqua Computer GmbH & Co. KG
- 23 -
Gelliehäuser Str. 1, 37130 Gleichen, Germany
9. Menu „Flow Sensor“
9. Menu „Flow Sensor“
9. Menu „Flow Sensor“
9. Menu „Flow Sensor“
9.1. Sensor name
9.1. Sensor name
9.1. Sensor name
9.1. Sensor name
Enter the name of the sensor that should be shown on the display. After
the selection of this menu entry, the current sensor name is shown and
can be changed. See also 7.1.1 Definition of Names.
9.2. Alarm Level 1
9.2. Alarm Level 1
9.2. Alarm Level 1
9.2. Alarm Level 1
Enter the flow in l/min for the flow sensor 1here, at which the PC-
emergency shutdown should be activated. Works only with additional
components, If you use the relay connector for other functions, you en-
ter the switch temperature here.
9.3. Alarm Level 2
9.3. Alarm Level 2
9.3. Alarm Level 2
9.3. Alarm Level 2
Enter the flow in l/min for the flow sensor 2here, at which the PC-
emergency shutdown should be activated. Works only with additional
components, If you use the relay connector for other functions, you en-
ter the switch temperature here.
Further remarks for the usage of a second flow sensor may be found in
chapter 9.6. Sensor 2 .
9.4. Display Unit
9.4. Display Unit
9.4. Display Unit
9.4. Display Unit
Here you can adjust the units displayed on the screen. Possible units are
liter/minute (default) or liter/hour.
9.5. Calibration Factor
9.5. Calibration Factor
9.5. Calibration Factor
9.5. Calibration Factor
Enter the impulses generated by the sensor per liter depending on the
used flow sensor here. Default value is 550 imp/l
9.6. Sensor 2 Connection
9.6. Sensor 2 Connection
9.6. Sensor 2 Connection
9.6. Sensor 2 Connection
The aquaero offers the possibility of connecting a second flow sensor in-
stead of a fan to the fan-output 4
The setting „Fan4= Fan4“ configures the fan-output 4 as a normal fan
connector.
