APRILIA TUAREG 660, Service Station Manual

Page: 27 / 311

Wheels and tyres
W
HEEL RIMS
Specification Desc./Quantity
Front wheel 2,15 x 21" with spokes, alloy rim channel
Rear wheel 4,25 x 18" with spokes, alloy rim channel
T
YRES
Specification Desc./Quantity
Front tire 90/90 - 21 M/C 54V
(permitted use category M + S)
Alternative solution:
90/90 - 21 M/C 54R M+S (Vmax: 170 km/h) (105 mph)
Inflation pressure Rider: 2 bar (200 KPa) (29 PSI)
Rider + Passenger: 2.2 bar (220 KPa) (31.90 PSI)
Off-road: 2 bar (200 KPa) (29 PSI)
Rear tire 150/70 R18 M/C 70V
(permitted use category M + S)
Alternative solution:
150/70 - 18 M/C 70R M+S (Vmax: 170 km/h) (105 mph)
Inflation pressure Rider: 2.5 bar (250 KPa) (36.25 PSI)
Rider + Passenger: 2.7 bar (270 KPa) (39.16 PSI)
Off-road: 2 bar (200 KPa) (29 PSI)
WARNING
RESPECT THE INFLATION PRESSURE INDICATED IN EVERY DRIVING / ROUTE CONDITION.
FAILURE TO COMPLY WITH THIS PRESCRIPTION CAN CAUSE SERIOUS DAMAGE TO THE
WHEELS AND TO THE VEHICLE IN GENERAL.
IN PARTICULAR, RIDING WITH INFLATION PRESSURES LOWER THAN THOSE PRESCRIBED
IS HIGHLY UNRECOMMENDED.
Supply
F
UEL SYSTEM
Specification Desc./Quantity
Fuel Unleaded gasoline E10 (95 R.O.N.)
Tightening Torques
If the following tables do not expressly indicate the tightening torque values, refer to the table with the
generic torque values indicated below.
S
ELF
-
TAPPING SCREW TORQUES FOR PLASTIC
2.9 mm 3.9 mm 4.2 mm 4.9 mm
Tightening torque: 1 Nm (0.73 lbf
ft)
1.5 Nm (1.10 lb
ft)
2 Nm (1.47 lb
ft)
2.5 Nm (1.84 lb
ft)
M
ETRIC SCREW TIGHTENING TORQUES
M4 M5 M6 M8 M10 M12
Tightening torque: 3 Nm (2.21 lbf
ft)
5.5 Nm (4.05
lbf ft)
9.5 Nm (7.00
lbf ft)
25 Nm (18.43
lb ft)
50 Nm (36.87
lb ft)
80 Nm (59.00
lb ft)
TUAREG 660
Characteristics
CHAR - 27