Applied Biosystems CytoFluor 4000 Series User Manual Download Page 146

Page: 146 / 221

Replacing Optical Filters

CytoFluor User’s Guide

6-9

To change the filter settings through the software:

In the Maintenance screen, drag the cursor across the

appropriate Position 1 through Position 6

box under

Excitation Filters or Emission Filters to select them.

Figure 6-11 Maintenance Screen

Type in the Wavelength and Bandwidth values that
correspond to the values of the excitation and emission
filters you just installed.

Click the Save

button once you enter the correct new

values. The system returns to the main setup screen.

NOTE

Click on the Cancel

button for the system to

disregard your changes and return to the previous
settings.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for CytoFluor 4000 Series






























































































































































































































Search results

Summary of Contents for CytoFluor 4000 Series

Reviews:

Applied Biosystems CytoFluor 4000 Series, User Manual, Page: 146 / 221

Search results

Summary of Contents for CytoFluor 4000 Series

Reviews: