Applied Biosystems CytoFluor 4000 Series User Manual Download Page 103

Page: 103 / 221

Chapter 4 Displaying, Printing, and Exporting Data

4-26

Applied Biosystems

4.5 Creating an Export Format

You can create up to 20 custom export formats. To create an
export format:

Select Export from the File menu. The Export/Print

dialog box appears.

Click Configure. The Export Setup dialog box appears.

Figure 4-21 Export Setup Dialog Box

Type the name of the format to create in the Format Name
text box. You can use any characters except commas.

Type the file extension in the File Suffix text box.

Select Tab or Comma to separate the data with in the
Delimiter pull-down list.

If you want to enclose text with a symbol, select the
symbol in the Wrap text with pull-down list.

To include header information or export the data in linear
or table format, use the procedure in the following
sections.

Click on OK to save the setup.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for CytoFluor 4000 Series






























































































































































































































Search results

Summary of Contents for CytoFluor 4000 Series

Reviews:

Applied Biosystems CytoFluor 4000 Series, User Manual, Page: 103 / 221

Search results

Summary of Contents for CytoFluor 4000 Series

Reviews: