Applied Biosystems CytoFluor 4000 Series User Manual Download Page 126

Page: 126 / 221

Defining Plates

CytoFluor User’s Guide

5-17

5.6.2 Defining a Plate

To define a plate type:

Click Lamp On, if necessary.

Set the Gain to zero to turn off the photomultiplier tube.

Select Define Plate from the Plate menu.

The Defined Plates screen appears (Figure 5-7). The
name and coordinates of the plate type used during the
last scan are displayed.

Figure 5-7 Defined Plates Screen

NOTE: You can double-click on a plate name in the
Defined Plate list to display the coordinates of that
plate.

Enter the

Enter the number

Enter the number
of columns

of rows

plate name

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for CytoFluor 4000 Series






























































































































































































































Search results

Summary of Contents for CytoFluor 4000 Series

Reviews:

Applied Biosystems CytoFluor 4000 Series, User Manual, Page: 126 / 221

Search results

Summary of Contents for CytoFluor 4000 Series

Reviews: