Plate Layout Overview
CytoFluor User’s Guide
5-7
5
NOTE: To change the assignment value of any well, select
the new Well types button first, then select the well.
Follow the steps in this section for general well assignment
steps:
1.
Click the Well type button that corresponds to the
sample type on the plate. (See Section 5.4, Using Well
Types Options, if you need more information.)
2.
Select the index value (00 to 99) from the index selection
box (located to the right of the Well types box). The index
value enables you to differentiate between different
samples of the same type (standard, unknown, etc.) on
the plate.
NOTE: You do not need to enter an index value for
wells defined as Empty, Hidden, or Excluded.
3.
Select the well(s) that you want to assign to sample
replicates. Click a single well to select it. For a group of
wells, start with the pointer at the leftmost corner well and
drag it until you highlight all the wells of the group.
(Replicate wells do not have to be contiguous.)
4.
Continue making as many changes as necessary. For
details on the changes you can make, see the following
sections.
5.
Save your changes.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com