21
20
Please plug in the terminal using the above Multi-com Adapter, telephone
line and one of the two connections (USB cable or Serial Cable) by following
the below installation instructions.
A. Place your ANZ POS Turbo Plus terminal on a clear, flat surface near the mains
power outlet and a telephone socket if dial-up communication is required
B. Connect the power supply (number 1) and telephone line (number 3) to the Multi-com
Adapter as shown above
C. Connect the power supply (number 2) to the main power outlet and phone line (number
4) to the telephone socket at the wall
Note:
it is recommended that the power supply is connected to the terminal at all times.
D. For USB cable option, connect USB cable (number 6) to the USB slave port on the back of
the terminal and connect USB (number 5) to your PC; or
E. For serial cable option, connect serial cable (number 8) to the Multi-com Adapter and
connect serial cable (number 7) to PC.
USB cable
Serial cable
5
6
7
USB cable cord to be sitting on the
cable slot protector on the back of
your terminal for lid to close
Connect
to USB
Slave
port on
the
back of
your
terminal
The last Stripe to the
right to be cut off
Ethernet Connector
to be crossed over
USB connector
(number 6)
and clipped into the
Ethernet port
6
USB
Slave
port
8
Example of USB Cable
Example of Serial Cable
