44
Perform card security checks, please refer to section 6
Fraud Minimisation for further information on the card
security checks.
Insert or Swipe the cardholder’s card. Chip Cards are
to be inserted and left in the Chip Card Reader.
Magnetic Stripe Cards are to be swiped through the
Magnetic Stripe Card Reader.
SELECT ACCOUNT
CHQ SAV CR
Select Account
Press < – > key for credit account.
Please note that for contactless
transactions account selection will
not be presented.
OR
PLEASE SELECT
PRESS 1 VISA DEBIT
PRESS 2 EFTPOS SAV
PRESS 3 EFTPOS CHQ
Select Application*
Press the number 1 on the keypad to make
selection scroll and press ENTER to select.
*Application names and order can vary depending
on the Card that is used.
CREDIT ACCOUNT
The selected account is displayed.
$10.00 KEY PIN
Have the cardholder enter their PIN then press ENTER.
TRANSACTION
APPROVED
If the transaction is approved, the Point of Sale
system will print a customer Transaction Record.
Please check for approval of the transaction before
completing the refund. Hand the customer their copy
of the Transaction Record and their card. If rejected,
the terminal will display an error message outlining
the reason (please refer to section 17). Notify the
customer and advise them to contact their Card Issuer.
Signature Authorisation
The preferred method of card payment authorisation in Australia is PIN. However, in certain
circumstances the terminal will prompt for a signature. In these cases, the terminal will display
the following screens:
