Anritsu MT9812B, Operation Manual, Page: 99 / 144

5-31
Remote Control
5
(3) Clearing the service request enable register
The service request enable register can be cleared by executing an
∗
SRE
common command or turning on the power.
When an
∗
SRE common command is used, the service request enable regis-
ter can be cleared by bringing the <DECIMAL NUMERIC PROGRAM
DATA> element value to 0. Clearing the service request enable register
disables the status information to generate an rsv local message, suppressing
issue of a service request.
When the power is turned on, the service request enable register is cleared if
the Power-ON status clear flag is True and the
∗
PSC command for disabling
clearing of this register is not supported.
5.6 Enabling the SRQ