Anritsu MT9812B, Operation Manual, Page: 73 / 144

5-5
Remote Control
5
5.3 Device Message
The following device messages are commands used commonly for both the GPIB
and the RS-232C.
The lowercase letters in the program messages can be omitted.
5.3.1 Commands for Setting Multiple Units
The multiple-unit setting commands can specify the same set value for the mul-
tiple units specified in <ch - list>.
MFRame:CATalog
Function
Inquires the inserted unit.
Program message
MFRame:CATalog?
Response message
< uid >< ch - list > {, < uid >< ch - list >}
∗
Parameter
< uid > := {OPM, OLS}
< ch - list >
:= (@< channel >{,< channel >}
∗
)
< channel >
:= {n|1
≤
n
≤
9}
Explanation
This command returns a list of inserted units.
This command is valid for all the channels, and does not return a channel list.
The notification <uid> identifies the following unit.
< uid > Unit
OPM Optical sensor unit
OLS Light source unit
5.3 Device Message