Anritsu MT9812B, Operation Manual, Page: 109 / 144

5-41
Remote Control
5
∗
TST
Function
Selftest results
Program message
∗
TST?
Response message
< code >
Parameter
< code >
:= {0, 1}
Explanation
This command conducts a self-test inside the device. The test result is set in the
output queue. The data in the output queue indicates that the test has been com-
pleted without causing any error.
< code > Contents
0 Test completed without error.
1 Test not executed, or executed
with error occurred.
∗
WAI
Function
Waits the next command.
Program message
∗
WAI
Explanation
This command executes overlap commands as sequential commands.
If this command is executed after an overlap command, the next command must
wait for the current command to end.
However, since the MT9812B does not have overlap commands, this command
counts for nothing.
5.9 IEEE488.2 Common Commands