Anritsu MT9812B, Operation Manual, Page: 131 / 144

7-7
Maintenance and Re-transportation
7
7.3 Re-transportation
Pay attention to the matters listed below to re-transport the MT9812B and plug-in
units.
• Use the packing materials used at the time of product purchase.
• As the products are classified as the precision electronic equipment, instruct
the carrier that “wetting” and “throwing away” of the products is strictly pro-
hibited during transportation.
Take the following actions in case packing materials used at the time of purchase
are lost.
(1) Make air cell mat (air cap sheet) or sheet with equivalent cushioning effects
available.
(2) Wrap the entire MT9812B or plug-in unit with the sheet.
(3) Make available a solid packing carton such as cardboard, wooden and alu-
minum boxes with between 10 and 15 cm margins in all directions over the
size of the product wrapped in sheet, and fill cushioning material between
10 and 15 cm thick at the bottom of the box.
(4) Put the MT9812B or the plug-in unit packed in sheet into the box and fill
cushioning material around it.
(5) Pack the carton box fast with string, tape or belt.
7.3 Re-transportation