Anritsu MT9812B, Operation Manual, Page: 112 / 144

Section 5 Remote Control
5-44
< node >:ENABle
Function
Sets the event enable register.
Program message
< node >:ENABle < mask >
< node >:ENABle?
Parameter
< code >
:= {Logical sum of 2
n
|0
≤
n
≤
15}
Explanation
This command finds the sum total of the bit digit values when the bit to be en-
abled in the event enable register becomes the parameter. The bit digit value to be
disabled is zero. The item of the event enable register to be specified is deter-
mined with <node>.
< node >[:EVENt]
Function
Checks the event register.
Program message
< node >[:EVENt]?
Response message
< code >
Parameter
< code >
:= {Logical sum of 2
n
|0
≤
n
≤
15}
Explanation
This command returns the sum total of the values of the event register. The item
of the event register to be specified is determined with <node>.