Anritsu MT9812B, Operation Manual, Page: 114 / 144

Section 5 Remote Control
5-46
5.10.2 Operation Status Register
The operation status register indicates the state of the equipment.
The commands are shown below. Insert these commands into the <node> portion
in the status register.
Command Description
STATus:OPERATION Operation status register
STATus:OPERATION:SETTLING State of temperature of light source
unit
STATus:OPERation
Function
Indicates the operation status register.
Explanation
Specifies the operation status register to be referenced.
The state of the equipment is indicated by allocating to bits. Each bit indicates the
following.
Bit Description
1 State of temperature of light source unit
STATus:OPERation:SETTling
Function
Indicates the state of temperature of light source unit.
Explanation
This command indicates the state of the temperature of the light source unit and
indicates whether it can be used.
The bits correspond one for one with the channels in order with bit 0 as Channel 1.
Depending on the state, whether the light source unit can be used is indicated.
Bit Corresponding channel
0 Channel 1
1 Channel 2
2 Channel 3
3 Channel 4
4 Channel 5
5 Channel 6
6 Channel 7
7 Channel 8
8 Channel 9
State Description
0 Cannot be used
1 Can be used.