Anritsu MT9812B, Operation Manual, Page: 113 / 144

5-45
Remote Control
5
< node >:NTRansition
Function
Sets the N-transition register.
Program message
< node >:NTRansition < mask >
< node >:NTRansition?
Response message
< mask >
Parameter
< mask >
:= {Logical sum of 2 n |0
≤
n
≤
15}
Explanation
This command finds the sum total of the bit digit values when the bit to be en-
abled in the N-transition register becomes the parameter. The bit digit value to be
disabled is zero. The item of the N-transition register to be specified is deter-
mined with <node>.
< node >:PTRansition
Function
Sets the P-transition register.
Program message
< node >:PTRansition < mask >
< node >:PTRansition?
Response message
< mask >
Parameter
< mask >
:= {Logical sum of 2
n
|0
≤
n
≤
15}
Explanation
This command finds the sum total of the bit digit values when the bit to be en-
abled in the P-transition register becomes the parameter. The bit digit value to be
disabled is zero. The item of the P-transition register to be specified is determined
with <node>.
5.10 Status Commands