Chapter 3 — Performance Verification
3-4 Test Equipment List
MG3702xA MM
PN: 10370-10372 Rev. B
3-3
Power meter
Frequency: 100 kHz to 20 GHz
Power range: –70 to +20 dBm
Anritsu model ML2437A/38A
C, P
Power sensor for power
meter
Frequency: 0.01 to 40 GHz (K)
Power range: –70 to +20 dBm
Anritsu model MA2474D
C, P
Power sensor for power
meter
Frequency: 100 kHz to 18 GHz (N)
Power range: –70 to +20 dBm
Anritsu model SC7400
C, P
Adapter for power sensor
SC7400
N female to K adapter
Anritsu model 34NFK50
C, P
Adapter for power sensor
calibration
N(m) to K(f)
Anritsu 34NKF50
C, P
Special AUX I/O cable
assembly
Provides interface between the
MG3702xA and the power meter
Anritsu PN: 806-97
P
Digital multimeter
Minimum 1% RMS ACV accuracy
at 100 kHz
Agilent 34401A
P
Function generator
Frequency: 0.1 Hz to 15 MHz
Agilent 33120A
C, P
Digital sampling
oscilloscope
Frequency: 50 GHz
Agilent 86100A
with 83484A 50 GHz module
P
Frequency reference
Frequency: 10 MHz
Accuracy: 5 x 10
–12
parts/day
Symmetricom (Datum)
Model 9390-6000
P
Measuring receiver
(b)
Noise floor: < –140 dBm @ 500
MHz
Anritsu model ML2530A
C, P
Local oscillator
)
Frequency: 0.01 to 20 GHz
Power: >+13 dBm 10 MHz to 20
GHz
Anritsu Model MG3692C with:
Options 3, 4, 16, and SM6191 (unit
must not have options 15x, 22 or
2B)
C, P
One of the following
(
)
:
Mixer Box (for low level
calibration)
and
Low Pass Filter (2 each)
(
)
or
Mixer
(
)
and M to M
Adapter
(
)
Frequency Range: 0.01 to 40 GHz
1.9 GHz LPF
or
Frequency Range: 500MHz to 40
GHz
Conversion loss: 10dBm (typical)
K(m) to K(m)
Anritsu PN: T2579
and
Anritsu PN: 1030-104
or
Anritsu PN: 60-114
and
Anritsu PN: K220B
C, P
Attenuator
Frequency range: DC to 40 GHz
Attenuation: 3, 6, 10, and 20 dB
(sizes and counts are determined
depending on options and
maximum output power of
instrument)
Anritsu part number SC7879 K set
of attenuators (41KC-3, 41KC-6,
41KC-10, 41KC-20) calibrated
from 100 K to 40 GHz
C, P
BNC 50
Ω
terminator
Any common source
C, P
BNC Tee connectors
Any common source
C, P
Generic 50
Ω
BNC RF
cables and connectors
Any common source
C, P
Generic GPIB cables
Any common source
C, P
Table 3-1.
Test Equipment List (2 of 3)
Instrument
Critical Specification
Manufacturer/Model
Usage
(
a
)
Summary of Contents for MG3702xA Series
