CNC Setup Utility Manual
P/N 70000490C - Index
Index-18
All rights reserved. Subject to change without notice.
10-December-04
vertical axis selection (MC_5210), 2-70
VGA (640x480), 2-62
W
wait for start, DNC, 2-85
warning messages
code ranges, 3-1
editing, 3-3
warranty, iii
wrap text (MC_1381), 2-14
X
X acceleration feedfwd. gain (.1mAs
2
/rev)
(MC_2029), 2-19, 5-9
X backlash compensation (MC_3031), 2-49
X ballscrew pitch (MC_2010), 2-17
X commutation offset angle (deg) (MC_2017),
2-17
X commutation offset speed (rpm)
(MC_2016), 2-17
X continuous path range (MC_4021), 2-54
X coulomb friction feedfwd. gain (mA)
(MC_2030), 2-19, 5-9
X current gain N<Nom (mV/A) (MC_2020),
2-18, 5-2
X current gain N>Nom (mV/A) (MC_2021),
2-18
X damping feedfwd. at Nnom (mA)
(MC_2033), 2-19
X DC bus voltage (MC_2014), 2-17
X default feed rate (MC_2052), 2-20
X default rapid rate (MC_2053), 2-20, 2-76
X display resolution (MC_2050), 2-20, 2-74
X friction feedfwd. timecons (.1ms)
(MC_2032), 2-19
X home
preset (MC_4217), 2-60
search feed (MC_4212), 2-60
sequence (MC_4202), 2-58
type (MC_4207), 2-59
X i
2
t guarding (MC_2015), 2-17
X in-position tolerance range (MC_2051),
2-20, 2-75
X inverter type (MC_2002), 2-15
X jog position (MC_4050), 2-55
X linear correction compensation (MC_3001),
2-47
X linear encoder
connector (MC_2004), 2-16
phase (MC_2009), 2-16
signal type (MC_2008), 2-16
sinewave period (MC_2005), 2-16
type (MC_2007), 2-16
µm per sinewave (MC_2005), 2-16
X motor encoder connector, MC_2000, 2-15
X motor encoder phase (MC_2013), 2-17
X motor type (MC_2003), 2-15
X number of segments (MC_3051), 2-50
X number of teeth ballscrew (MC_2012), 2-17
X number of teeth motor (MC_2011), 2-17
X offset (MC_3056), 2-51
X pos. control output limit (rpm) (MC_2027),
2-19
X pos. control prop. gain (1/rev) (MC_2026),
2-18, 5-9
X PWM output connector (MC_2001), 2-15
X segment length (MC_3066), 2-52
X skew error compensation (MC_3016), 2-48
X software limit (MC_4006), 2-53
X- software limit (MC_4006), 2-83
X software limit enable (MC_4011), 2-53,
2-83
X torque
LP filter timecons (.1ms) (MC_2034), 2-19
notch filter damp. (.1dB) (MC_2036), 2-19
notch filter freq. (.1Hz) (MC_2035), 2-19
offset (mA) (MC_2031), 2-19
X vel. control
diff. gain (.1mAs
2
/rev) (MC_2025), 2-18
integral limit (ms) (MC_2024), 2-18
integral timecons (.1ms) (MC_2023),
2-18, 5-6, 5-7
prop. gain (mAs/rev) (MC_2022), 2-18,
5-6, 5-7
X velocity feedfwd. gain (MC_2028), 2-19, 5-9
X velocity filter (MC_2018), 2-17
X zero cross (MC_3061), 2-52
X+ software limit (MC_4001), 2-53, 2-83
X12, 3-D probe, 5-16
X13, touch probe, 5-16
X30, description, 5-16
X-axis, setup parameters
description, 2-74
table, 2-15
XY retract amount (MC_1159), 2-11
XYZ axes, primary axes, 1-1
Y
Y acceleration feedfwd. gain (.1mAs
2
/rev)
(MC_2129), 2-24, 5-10
Y backlash compensation (MC_3032), 2-49
Y ballscrew pitch (MC_2110), 2-22
