CNC Setup Utility Manual
P/N 70000490C - Index
Index-16
All rights reserved. Subject to change without notice.
10-December-04
stop/start spindle during hold/start
(MC_2977), 2-45
SVGA (800x600), 2-62
T
T probe, description, 5-16
timeout, setting, 2-68
TLO.
See
tool length offset
tool activation options
Both, 2-87
description, 2-87
No, 2-87
On M6, 2-87
On Tn, 2-87
tool change macro
number (MC_5010), 2-66, 2-89, 2-91
number, parameter, 2-91
parameters, setting, 2-91
program (MC_5009), 2-66, 2-89, 2-91
program, parameter, 2-91
tool changer installed (MC_5007), 2-66, 2-87,
2-89, 2-90
tool changer macro, example, 2-91
tool display (MC_1105), 2-5
tool length offset, restore after power-up or
home (MC_5018), 2-67
tool management
activation options, 2-86
automatic tool change operation, 2-88
M19 commands, enabling, 2-90
manual tool change operation, 2-87
setup parameters, description, 2-86
setup parameters, table, 2-65
tool probe variables, setup parameters, table,
2-10
TuneMod (F6), 5-1
tuning
manual
acceleration feedforward test, 5-12
current controller, 5-10
default, initial parameters, 5-10
frequency test, 5-11
position proportional test, 5-12
velocity integral test, 5-12
velocity proportional test, 5-12
miscellaneous tests
current vs. distance plot, 5-13
overall system performance, 5-14
miscellaneous tests, listed, 5-13
modes
automatic, description, 5-1
automatic, listed, 5-1
description, 5-1
manual, description, 5-1
manual, listed, 5-1
test sequence, listed, 5-1
tuning modes, description, 5-1
Tuning (F7), 5-1
U
U acceleration feedfwd. gain (.1mAs
2
/rev)
(MC_2329), 2-36, 5-10
U axis type (MC_2354), 2-37
U backlash compensation (MC_3034), 2-49
U ballscrew pitch (MC_2310), 2-33
U commutation offset angle (deg) (MC_2317),
2-34
U commutation offset speed (rpm)
(MC_2316), 2-34
U continuous path range (MC_4024), 2-55
U coulomb friction feedfwd. gain (mA)
(MC_2330), 2-36, 5-10
U current gain N<Nom (mV/A) (MC_2320),
2-34, 5-2
U current gain N>Nom (mV/A) (MC_2321),
2-35
U damping feedfwd. at Nnom (mA)
(MC_2333), 2-36
U DC bus voltage (MC_2314), 2-34
U default feed rate (MC_2352), 2-37
U default rapid rate (MC_2353), 2-37, 2-76
U display resolution (MC_2350), 2-36, 2-74
U friction feedfwd. timecons (.1ms)
(MC_2332), 2-36
U home
preset (MC_4220), 2-60
search feed (MC_4215), 2-60
sequence (MC_4205), 2-58
type (MC_4210), 2-59
U i
2
t guarding (MC_2315), 2-34
U in-position tolerance range (MC_2351),
2-36, 2-75
U inverter type (MC_2302), 2-32
U jog position (MC_4053), 2-56
U linear correction compensation (MC_3004),
2-48
U linear encoder
µ
m per sinewave (MC_2305), 2-33
connector (MC_2304), 2-32
phase (MC_2309), 2-33
signal type (MC_2308), 2-33
sinewave period (MC_2305), 2-33
