CNC Setup Utility Manual
P/N 70000490C - Index
All rights reserved. Subject to change without notice
Index-5
10-December-04
home type, 2-59
positive/negative index limit, 2-59
macro called for Mcode
#1 (MC_4401), 2-63
#10 (MC_4419), 2-64
#2 (MC_4403), 2-63
#3 (MC_4405), 2-63
#4 (MC_4407), 2-63
#5 (MC_4409), 2-63
#6 (MC_4411), 2-64
#7 (MC_4413), 2-64
#8 (MC_4415), 2-64
#9 (MC_4417), 2-64
macro called for M-code, setup parameters,
description, 2-86
manual panel keys, illustration, 1-3
manual tool
change operation, 2-87
change parameters, description, table,
2-87
number greater than number of bins in
tool changer, 2-89
manual tuning
acceleration feedforward test, 5-12
current controller, 5-10
default, initial parameters, 5-10
description, 5-10
frequency test, 5-11
position proportional test, 5-12
tuning mode, description, 5-1
tuning modes, listed, 5-1
velocity integral test, 5-12
velocity proportional test, 5-12
Map 1, 6-2
Map 2, 6-3
max. memory allocated (MC_1014), 2-4
max. programmed linear axis feedrate
(MC_4301), 2-60
max. programmed rotary axis feedrate
(MC_4305), 2-61
maximum arc correction (MC_1006), 2-3
maximum programmed
linear axis feedrate, 2-60
rotary axis, feedrate, 2-61
maximum, stoke from home for first pick
(MC_1152), 2-10
MBENG.TXT, 3-2
MC_1000, default axis display, 2-2
MC_1001, default plane, 2-2
MC_1002, default units, 1-6, 2-2
MC_1003, default axis values, 2-2
MC_1004, circle adjustments, 2-3
MC_1005, circle centers, 2-3
MC_1006, default tool type, 2-5
MC_1006, maximum arc correction, 2-3
MC_1007, internal accuracy, 2-3
MC_1008, external accuracy, 2-3
MC_1009, compensation cutoff angle, 2-3,
2-71
MC_1011, user macro file, 2-3
MC_1012, load user macro file, 2-3
MC_1013, disk access marker, 2-4
MC_1014, max. memory allocated, 2-4
MC_1015, force simulation mode, 2-4
MC_1016, screen blanking delay, 2-4
MC_1032, enable radius compensation error
checking, 2-4
MC_1100, restore Draw to previous session,
2-5
MC_1101, default program block mode, 2-5
MC_1102, display program text, 2-5
MC_1103, grid, 2-5
MC_1104, grid size, 2-5
MC_1105, tool display, 2-5
MC_1107, cutter compensation in Draw, 2-6
MC_1108, draw view, 2-6
MC_1109, aspect ratio correction factor, 2-6
MC_1110, save/restore Draw image when
using Edit, 2-6
MC_1120, user definable variable #1120, 2-7
MC_1121, user definable variable #1121, 2-7
MC_1122, user definable variable #1122, 2-7
MC_1123, user definable variable #1123, 2-7
MC_1124, user definable variable #1124, 2-7
MC_1125, user definable variable #1125, 2-7
MC_1126, user definable variable #1126, 2-7
MC_1127, user definable variable #1127, 2-7
MC_1128, user definable variable #1128, 2-7
MC_1129, user definable variable #1129, 2-7
MC_1130 – MC_1139, user definable
variables, description, 2-73
MC_1130, user definable variable #1130, 2-7
MC_1131, user definable variable #1131, 2-7
MC_1132, user definable variable #1132, 2-8
MC_1133, user definable variable #1133, 2-8
MC_1134, user definable variable #1134, 2-8
MC_1135, user definable variable #1135, 2-8
MC_1136, user definable variable #1136, 2-8
MC_1137, user definable variable #1137, 2-8
MC_1138, user definable variable #1138, 2-8
MC_1139, user definable variable #1139, 2-8
MC_1140, user definable variable #1140, 2-8
