CNC Setup Utility Manual
P/N 70000490C - Configuration Utilities
All rights reserved. Subject to change without notice.
10-December-04
4-1
Section 4 - Configuration Utilities
Use the Utilities to manage the configuration file saved in the Setup
Utility.
CAUTION: Always maintain an updated hardcopy of the configuration file. If you
accidentally erase the file, you must enter the settings manually after
you reinstall the software.
Save Configuration
This feature “force saves” a configuration file, regardless of whether any
changes were made to the existing file in the Setup Utility.
NOTE:
ANILAM recommends that you save your file before you use any
other Configuration Utilities option.
, Menu B
. Highlight
Save
Configuration
. Press
ENTER
.
The system prompts the user for a password.
2. Press
ENTER
. The configuration will be saved. The backup filename
is P6MCFG.BAK
Copy Configuration
This feature enables the user to make copies of the configuration and
save the copies to various locations using new filenames, if desired.
, Menu B
. Highlight
Copy Configuration
. Press
ENTER
.
Menu C
displays.
2. Highlight
A:
to copy the configuration to a floppy diskette. The
configuration will be
saved as
A:\P6MCFG.CFG
.
3. Highlight
Other..
to save the configuration to another drive or under
another filename.
Type in the drive to which you wish to save the configuration and the
new filename. For example: C:\HOME\FILE_1.CFG
NOTE:
If you choose a filename that already exists, the system will
warn you that a file already exists. Unless you change the new
filename, the system will overwrite the existing file.
