CNC Setup Utility Manual
P/N 70000490C - Index
Index-14
All rights reserved. Subject to change without notice.
10-December-04
save/restore Draw image when using Edit
(MC_1110), 2-6
saving, setup parameters, changes, 1-5
S-axis, spindle axis, 1-1
screen blanking delay (MC_1016), 2-4
screen, show introduction screen (MC_4390,
2-63
screens, Prog. Interface Error Messages,
illustration, 3-2
security, 3-4
servo reset key, illustration, 1-3
servo up delay rapidrate (MC_4309), 2-62
setting
home preset, 2-60
home sequence, 2-58
setup options, other, listed, 3-1
setup parameters
backlash compensation, table, 2-49
ballscrew compensation, description, 2-78
ballscrew compensation, table, 2-49
continuous path, table, 2-54
control software, description, 2-71
DNC, table, 2-56
draw mode, table, 2-5
dynamic numeric control, description,
2-84
editor mode, table, 2-12
handwheel, table, 2-57
home, table, 2-58
interface, table, 2-68
jog return position, table, 2-55
linear correction compensation, table,
2-47
M-Code for macro call and Macro called
for M-Code, description, 2-86
M-Code macro call, table, 2-63
miscellaneous, description, 2-85
miscellaneous, table, 2-60
more, table, 2-70
position error check, table, 2-55
printer, table, 2-14
program directory, description, 2-73
program directory, table, 2-13
RS-232 communication
description, 2-73
table, 2-14
saving changes, 1-5
skew error compensation, table, 2-48
software limits, description, 2-83
software limits, table, 2-53
spindle-axis, description, 2-74, 2-76
spindle-axis, table, 2-37
tool management, description, 2-86
tool management, table, 2-65
tool prove variables, table, 2-10
U-axis, description, 2-74
U-axis, table, 2-32
user definable variables, table, 2-7
X-axis, description, 2-74
X-axis, table, 2-15
Y-axis, description, 2-74
Y-axis, table, 2-20
Z-axis, description, 2-74
Z-axis, table, 2-26
setup utility
accessing, 1-6
default settings, description, 1-2
introduction, 1-1
map, illustrations, 6-1
navigating, 1-2
parameters, setting, 1-5
shift key, illustration, 1-2
show introduction screen (MC_4390, 2-63
show top line (MC_1201), 2-12
single gear, setting, 2-77
Single-M40, gear range, 2-77
skew error compensation (MC_3015), 2-48
skew error compensation, setup parameters,
table, 2-48
software
information, 1-1
version, 1-1
version update, 3-4
software (MC_1355), 2-14
software limits
setting, 2-83
setup parameters, description, 2-83
setup parameters, table, 2-53
space key, illustration, 1-2
spindle
acceleration feedfwd. gain (.1mAs
2
/rev)
(MC_2929), 2-41, 5-10
analog, maximum motor speed (rpm)
(MC_2942), 2-42
analog, motor phase (MC_2943), 2-43
analog, pos. control integral gain
(MC_2944), 2-43
analog, pos. control integral limit
(MC_2945), 2-43
axis setup, description, 2-76
axis setup, spindle DC output, 2-76
axis setup, spindle gear ranges, 2-77
