CNC Setup Utility Manual
P/N 70000490C - Machine Constants
2-14
All rights reserved. Subject to change without notice.
10-December-04
Table 2-2, Machine Constants Setup
(Continued)
Machine Constant
Parameter
Function Settings
RS-232 Communication Setup Parameters
MC_1350: Port
Selects a communications port or
disables. Must enable for remote
communications.
COM1, COM2,
Disabled
[Default: Disabled]
MC_1351: Baud
Selects a baud.
110, 150, 300, 600, 1200, 2400,
4800,
9600
[Default], or 19200
MC_1352: Parity
Selects parity.
NONE, ODD, or
EVEN
[Default]
MC_1353:
Data bits
Enters number of data bits.
7
[Default]
8
MC_1354:
Stop bits
Enters number of stop bits.
0
1
[Default]
MC_1355:
Software
Refers to Xon or Xoff or “handshaking”
(transmission/ receipt of data via
RS-232) in communications packages.
On
- Enables handshaking
[Default]
Off - Disables handshaking
Printer Setup Parameters
MC_1375:
Default output device
Specifies where file will be printed.
PRN [Default]
To print to another file, enter drive,
path, and filename with extension.
If the filename entered is not an
existing file, the CNC creates the
file and transfers the data to the
file. If the filename entered is an
existing file, the CNC overwrites
the data in the file with the print file
data.
MC_1376:
Lines per page
Number of lines to be printed per page
(8.5 X 11”).
Range (1–66)
55 [Default]
Enter desired value
MC_1377:
Page heading
Prints a page heading including
filename, date and time, and page
number.
Yes
- Prints heading. [Default]
No - Does not print heading
MC_1378:
Line numbers
Prints line numbers on hard copy of file. Yes - Prints line numbers
No
-
Select No
if no line numbers
are desired [Default]
MC_1381:
Wrap text
Wraps text to the next line if program is
greater than 80 characters.
Yes
- Wraps text [Default]
No - Truncates text
(Continued…)
