Security Measures
166
Instruction Manual - NXA-ENET8-POE+
Perform these steps to bind an ACL to a port:
1.
Click
Security
>
ACL
.
2.
Select
Configure Interface
from the Step list.
3.
Select
Configure
from the Action list.
4.
Select
IP
,
MAC
or
IPv6
from the Type options.
5.
Select a port.
6.
Select the name of an ACL from the ACL list.
7.
Click
Apply
.
Showing ACL Hardware Counters
Use the Security > ACL > Configure Interface (Show Hardware Counters) page to show statistics for ACL hardware counters.
The following table lists the options on this page:
Perform these steps to show statistics for ACL hardware counters:
1.
Click
Security
>
ACL
.
2.
Select Configure Interface from the Step list.
3.
Select Show Hardware Counters from the Action list.
4.
Select a port.
5.
Select ingress or egress traffic.
FIG. 194
Binding a Port to an ACL
Security - ACL Options
Port
Port identifier (Range: 1-10/26/28/52)
Type
Selects the type of ACL.
Direction
Displays statistics for ingress or egress traffic.
Query
Displays statistics for selected criteria.
ACL Name
The ACL bound to this port.
Action
Shows if action is to permit or deny specified packets.
Rules
Shows the rules for the ACL bound to this port.
Time-Range
Name of a time range.
Hit
Shows the number of packets matching this ACL.
Clear Counter
Clears the hit counter for the specified ACL.
FIG. 195
Showing ACL Statistics