Basic Management Tasks
57
Instruction Manual - NXA-ENET8-POE+
Perform these steps to configure CPU Guard:
1.
Click
System
>
CPU Guard
.
2.
Set CPU guard status, configure the watermarks or threshold parameter, enable traps if required.
3.
Click
Apply
.
Displaying Memory Utilization
Use the System > Memory Status page to display memory utilization parameters.
The following table displays the options on this page:
To display memory utilization, click
System
, then
Memory Status
.
FIG. 45
Configuring CPU Guard
System - Memory Status Options
Free Size
The amount of memory currently free for use.
Used Size
The amount of memory allocated to active processes.
Total
The total amount of system memory.
FIG. 46
Displaying Memory Utilization