Overview
18
Instruction Manual - NXA-ENET8-POE+
Web Interface
The NXA-ENET8-POE+ provides a broad range of features for Layer 2 switching and Layer 3 routing. It includes a management
agent that allows you to configure the features listed in this manual. The default configuration can be used for most of the features
provided by this switch. However, there are many options that you should configure to maximize the switch's performance for your
particular network environment.
Key Features
The NXA-ENET8-POE+ provides a wide range of advanced performance enhancing features, as described below:.
NXA-ENET8-POE+ Key Features
Configuration Backup
and Restore
Using management station or TFTP server
Authentication
• Console, Telnet, web - user name/password, RADIUS,
• Port - IEEE 802.1X, MAC address filtering
• SNMP v1/2c - Community strings
• SNMP version 3 - MD5 or SHA password Telnet - SSH
• Web - HTTPS
General Security
Measures
• AAA
• ARP Inspection
• DHCP Snooping (with Option 82 relay information)
• DoS Protection
• IP Source Guard
• Port Authentication - IEEE 802.1X
• Port Security - MAC address filtering
Access Control Lists
Supports up to 256 ACLs, 128 rules per ACL, and 512 rules per system
DHCP/DHCPv6
Client, Relay, Relay Option 82
Port Configuration
Speed, duplex mode, and flow control
Port Mirroring
3 sessions, one or more source ports to an analysis port
Port Trunking
Supports up to 8 trunks - static or dynamic trunking (LACP)
Congestion Control
• Rate Limiting
• Throttling for broadcast, multicast, unknown unicast storms
Address Table
• 8K MAC addresses in the forwarding table (shared with L2 unicast, L2 multicast, IPv4 multicast, IPv6
multicast)
• 1K static MAC addresses
• 512 L2 IPv4 multicast groups (shared with MAC address table)
IP Version 4 and 6
Supports IPv4 and IPv6 addressing and management
IEEE 802.1D Bridge
Supports dynamic data switching and addresses learning
Store-and-Forward
Switching
Supported to ensure wire-speed switching while eliminating bad frames
Spanning Tree
Algorithm
Supports standard STP, Rapid Spanning Tree Protocol (RSTP), and Multiple Spanning Trees (MSTP)
Virtual LANs
Up to 4094 using IEEE 802.1Q, port-based, protocol-based, voice VLANs, and QinQ tunnel
Traffic Prioritization
Default port priority, traffic class map, queue scheduling, IP Precedence, or Differentiated Services Code Point
(DSCP)
Qualify of Service
Supports Differentiated Services (DiffServ)
Link Layer Discovery
Protocol
Used to discover basic information about neighboring devices
Multicast Filtering
Supports IGMP snooping and query for Layer 2