Quality of Service
127
Instruction Manual - NXA-ENET8-POE+
Perform these steps to edit the rules for a class map:
1.
Click
Traffic
>
DiffServ
.
2.
Select
Configure Class
from the Step list.
3.
Select
Add Rule
from the Action list.
4.
Select the name of a class map.
5.
Specify type of traffic for this class based on an access list, DSCP or IP Precedence value, VLAN, or CoS value. You can specify
up to 16 items to match when assigning ingress traffic to a class map.
6.
Click
Apply
.
Perform these steps to show the rules for a class map:
1.
Click
Traffic
>
DiffServ
.
2.
Select
Configure Class
from the Step list.
3.
Select
Show Rule
from the Action list.
FIG. 142
Adding Rules to a Class Map
FIG. 143
Showing the Rules for a Class Map