Basic Administration Protocols
228
Instruction Manual - NXA-ENET8-POE+
Configuring RMON Statistical Samples
Use the Administration > RMON (Configure Interface - Add - Statistics) page to collect statistics on a port, which can subsequently
be used to monitor the network for common errors and overall traffic rates.
Command Usage
If statistics collection is already enabled on an interface, the entry must be deleted before any changes can be made.
The information collected for each entry includes:
input octets, packets, broadcast packets, multicast packets, undersize packets, oversize packets, CRC alignment errors,
jabbers, fragments, collisions, drop events, and frames of various sizes.
The following table lists the options on this page:
Perform these steps to enable regular sampling of statistics on a port:
1.
Click
Administration
>
RMON
.
2.
Select
Configure Interface
from the Step list.
3.
Select
Add
from the Action list.
4.
Click
Statistics
.
5.
Select a port from the list as the data source.
6.
Enter an index number, and the name of the owner for this entry
7.
Click
Apply
.
Perform these steps to show configured RMON statistical samples:
1.
Click
Administration
>
RMON
.
2.
Select
Configure Interface
from the Step list.
3.
Select
Show
from the Action list.
4.
Select a port from the list.
5.
Click
Statistics
.
Administration - RMON Options
Port
The port number on the switch. (Range: 1-10/26/28/52)
Index
Index to this entry. (Range: 1-65535)
Owner
Name of the person who created this entry. (Range: 1-32 characters)
FIG. 266
Configuring an RMON Statistical Sample
FIG. 267
Showing Configured RMON Statistical Samples