Basic Administration Protocols
196
Instruction Manual - NXA-ENET8-POE+
Perform these steps to display LLDP information for the local device:
1.
Click
Administration
>
LLDP
.
2.
Select
Show Local Device Information
from the Step list.
3.
Select
General
,
Port
,
Port Details
,
Trunk
, or
Trunk Details
.
Interface Details
The attributes listed below apply to both port and trunk interface types. When a trunk is listed, the descriptions apply to the first
port of the trunk.
Local Port/Trunk
Local interface on this switch
Port/Trunk ID Type
There are several ways in which a port may be identified. A port ID subtype is used to indicate how
the port is being referenced in the Port ID TLV. The following lists the references for the port ID
subtypes:
• Interface alias - IfAlias (IETF RFC 2863)
• Chassis component - EntPhysicalAlias when entPhysClass has a value of 'chassis(3)' (IETF RFC
2737)
• Port component - EntPhysicalAlias when entPhysicalClass has a value 'port(10)' or
'backplane(4)' (IETF RFC 2737)
• MAC address - MAC address (IEEE Std 802-2001)
• Network address - networkAddress
• Interface name - ifName (IETF RFC 2863)
• Agent circuit ID - agent circuit ID (IETF RFC 3046)
• Locally assigned - locally assigned
Port/Trunk ID
A string that contains the specific identifier for the local interface based on interface subtype used
by this switch.
Port/Trunk Description
A string that indicates the port or trunk description. If RFC 2863 is implemented, the ifDescr object
should be used for this field.
MED Capability
The supported set of capabilities that define the primary function(s) of the interface:
• LLDP-MED Capabilities
• Network Policy
• Location Identification
• Extended Power via MDI - PSE
• Extended Power via MDI - PD
• Inventory
FIG. 225
Displaying Local Device Information for LLDP (General)
FIG. 226
Displaying Local Device Information for LLDP (Port)
Administration - LLDP Options