Quality of Service
130
Instruction Manual - NXA-ENET8-POE+
Perform these steps to show the rules for a policy map:
1.
Click
Traffic
>
DiffServ
.
2.
Select
Configure Policy
from the Step list.
3.
Select
Show Rule
from the Action list.
Attaching a Policy Map to a Port
Use the Traffic > DiffServ (Configure Interface) page to bind a policy map to a port.
Command Usage
First define a class map, define a policy map, and then bind the service policy to the required interface.
The following table lists the options on this page:
Perform these steps to bind a policy map to a port:
1.
Click
Traffic
>
DiffServ
.
2.
Select
Configure Interface
from the Step list.
3.
Check the box under the Ingress field to enable a policy map for a port.
4.
Select a policy map from the scroll-down box.
5.
Click
Apply
.
FIG. 147
Showing the Rules for a Policy Map
Traffic - Diffserv Options
Port
Specifies a port. (Range: 1-10/26/28/52)
Ingress
Applies the selected rule to ingress traffic.
FIG. 148
Attaching a Policy Map to a Port