IP Services
259
Instruction Manual - NXA-ENET8-POE+
Perform these steps to show the list name servers:
1.
Click
IP Service
>
DNS
.
2.
Select
Show Name Servers
from the Action list.
Configuring Static DNS Host to Address Entries
Use the IP Service > DNS - Static Host Table (Add) page to manually configure static entries in the DNS table that are used to map
domain names to IP addresses.
Command Usage
Static entries may be used for local devices connected directly to the attached network, or for commonly used resources located
elsewhere on the network.
The following table lists the options on this page:
Perform these steps to configure static entries in the DNS table:
1.
Click
IP Service
>
DNS
>
Static Host Table
.
2.
Select
Add
from the Action list.
3.
Enter a host name and the corresponding address.
4.
Click
Apply
.
Perform these steps to show static entries in the DNS table:
1.
Click
IP Service
>
DNS
>
Static Host Table
.
2.
Select
Show
from the Action list.
FIG. 311
Showing the List of Name Servers for DNS
IP Service - DNS (Static Host Table) Options
Host Name
Name of a host device that is mapped to one or more IP addresses. (Range: 1-127 characters)
IP Address
IPv4 or IPv6 address(es) associated with a host name.
FIG. 312
Configuring Static Entries in the DNS Table
FIG. 313
Showing Static Entries in the DNS Table