Basic Administration Protocols
193
Instruction Manual - NXA-ENET8-POE+
Perform these steps to configure LLDP interface attributes:
1.
Click
Administration
>
LLDP
.
2.
Select
Configure Interface
from the Step list.
3.
Select
Configure General
from the Action list.
4.
Select an interface from the Port or Trunk list.
5.
Set the LLDP transmit/receive mode, specify whether or not to send SNMP trap messages, and select the information to
advertise in LLDP messages.
6.
Click
Apply
.
MED-Location Civic Address
Configures information for the location of the attached device included in the MED TLV field of
advertised messages, including the country and the device type.
• Country - The two-letter ISO 3166 country code in capital ASCII letters. (Example: DK, DE or US)
• Device entry refers to - The type of device to which the location applies. Location can refer to the
location of the DHCP server, the location of the network element closest to client, or the location
of the client (This is the default.)
FIG. 222
Configuring LLDP Interface Attributes
Administration - LLDP Options