Basic Administration Protocols
216
Instruction Manual - NXA-ENET8-POE+
Perform these steps to configure a local SNMPv3 user:
1.
Click
Administration
>
SNMP
.
2.
Select
Configure User
from the Step list.
3.
Select
Add SNMPv3 Local User
from the Action list.
4.
Enter a name and assign it to a group. If the security model is set to SNMPv3 and the security level is authNoPriv or authPriv,
then an authentication protocol and password must be specified. If the security level is authPriv, a privacy password must
also be specified.
5.
Click
Apply
.
Perform these steps to show local SNMPv3 users:
1.
Click
Administration
>
SNMP
.
2.
Select
Configure User
from the Step list.
3.
Select
Show SNMPv3 Local User
from the Action list.
Perform these steps to change a local SNMPv3 local user group:
1.
Click
Administration
>
SNMP
.
2.
Select
Change SNMPv3 Local User Group
from the Action list.
3.
Select the User Name.
4.
Enter a new group name.
5.
Click
Apply
.
FIG. 247
Configuring Local SNMPv3 Users
FIG. 248
Showing Local SNMPv3 Users
FIG. 249
Changing a Local SNMPv3 User Group